自动化设备维修常识是自动化设备使用厂商必须了解和学习的日常业务技能。 现在的设备许多都是自动化设备，自动化设备维修常识越来越普及。而且设备上面都有触摸屏或文本显示器，一般设备的常见故障都会显示在上面。所以相对来讲自动化设备的维修比较容易，能很快的确定故障原因。下面介绍铣扁机等自动化设备维修常识的一般维修思路： 1、看自动化设备的画面或文本显示器上是否有报警信息，如果有，根据信息查找原因。 2、要熟悉自动化设备的动作流程，一步一步的条件。比如说设备报警“未在原点”，这时就要知道设备的原点在哪里，看设备是否真的没有在原点。然后再进行下一步的原因检查。 3、要认识各种检测传感器。一般的自动化设备，都是靠检测信号来发出对应的动作指令或是提示当前动作完成与否的。所以无论有无报警擦提示，一但设备无动作，先去查看各个位置的检测开关。 4、当确认检测信号无问题时，最后去查看执行装置或控制器件。
The common knowledge of automation equipment maintenance is a daily business skill that automation equipment manufacturers must understand and learn. Many devices nowadays are automated, and the knowledge of automated equipment maintenance is becoming increasingly popular. And there are touch screens or text displays on the devices, which usually display common faults of the devices. So relatively speaking, the maintenance of automation equipment is relatively easy, and the cause of the malfunction can be quickly determined. The following is a general maintenance idea for automation equipment such as milling machines: 1. Check if there is an alarm message on the screen or text display of the automation equipment. If there is, search for the cause based on the information. 2. To be familiar with the operation process of automation equipment, step by step conditions. For example, if the device alarms "not at the origin", it is necessary to know where the origin of the device is and see if it is really not at the origin. Then proceed to the next step of root cause analysis. 3. Be familiar with various detection sensors. General automation equipment relies on detecting signals to issue corresponding action instructions or prompt whether the current action is completed or not. So regardless of whether there is an alarm or not, once the device is not functioning, check the detection switches at each position first. 4. When confirming that there is no problem with the detection signal, finally check the execution device or control device.